How To Replace Shark Navigator Filters

Details

Euro Pro Shark Deluxe Filter Kit. Fits Euro Pro Shark Navigator Upright models UV410 Serial, NV36A, NV36, NV44, NV46C, NV46, NV46REF, NV4626, NV4631, NV42. This kit includes 1 washable pre cream filters and i post motor filter. Fabricated of durable high quality fabric.

Replaces Role # XFF36, EU-18061, F657

XFF36 FILTER, FELT & FOAM NV36,NV42,NV46,UV410 3PK TO FIT MODEL UV402 NAVIGATOR NV36 NV42 NV46 UV410

How to modify Filter Kit XFF36
how to change NV42 NV44 NV46 filters
To replace the pre-motor filters:
1. Remove the dust cup.
2. Lift the filter frame out from the top of the motor base.
three. Remove the foam filter from inside the filter frame.
four. Turn the filter frame upside down and carefully pull the felt filter out
5. Replace the felt and foam filter from the XFF36 kit y'all merely bought at EZvacuum.com
6. Insert the foam filter into the tiptop of the filter frame. When replacing the felt filter, make certain that the felt office of the filter is facing out.
7. Replace the filter frame into the motor base and so replace the grit cup.
eight. After every 3-4 vacuum uses, take out the cream and felt filter and rinse them thoroughly in lukewarm water until the water runs clear.
DO NOT put the filters in the washing auto or dishwasher.
NOTE: The fabric in the filters will discolor over time. This is NORMAL and will not bear upon the performance of the filters.
9. Squeeze out excess h2o and let air-dry for at to the lowest degree 24 hours before replacing. Practise not use a hair dryer or other heating methods to dry out.
10. Put the filters back once they are 100% dry out. Follow pace 4 thru 7

To alter the post-motor filter:
i. Remove the filter cover from the front of the vacuum by pulling up on the tab and pulling the cover away from the vacuum.
2. Take out the filter past pulling it straight out. Replace information technology with the filter have a notch on the elevation.
3. Replace the cover by inserting the two tabs into the holes at the bottom so swinging the cover up until it clicks into place.
4. Later on every three-4 vacuum uses, take out the filter, turn it over so that the dirty side is on the bottom and vigorously tap it clean confronting a garbage can to remove any dust.
5. Wash the filter under the tap using lukewarm water with the muddy side face down until the water runs clear.
Exercise Not put the filter in the washing machine or dishwasher.
Annotation: The material in the filter will discolor over time. This is NORMAL and will not affect the functioning of the filter.
vi. Allow the filter to air dry for 24 hours. Do not use a hair dryer or other heating methods to dry.
vii. One time the filter is dry, supervene upon information technology back into the vacuum.